
Add to Cart
25T Truck-mounted Crane with 6x4 chassis max reach 48m telescopic boom and jib
A truck-mounted crane has two parts: the carrier, often referred to as the lower, and the lifting component which includes the boom, referred to as the upper.
These are mated together through a turntable, allowing the upper to swing from side to side. These modern hydraulic truck cranes are usually single-engine machines, with the same engine powering the undercarriage and the crane. The upper is usually powered via hydraulics run through the turntable from the pump mounted on the lower.
Main Features
Chassis Dimension | ||
Overall length | mm | 10800 |
Overall width | mm | 2480 |
Overall height | mm | 2970 |
Chassis Feature | ||
Gross vehicle weight (GVW) | kg | 25000 |
Steering/Drive axle loads | kg | 5000/10000+10000 |
Drive model | - | 6×4 |
Number of axles | - | 3 |
Wheelbase | mm | 4350+1300mm |
Engine | ||
Engine model | - | YC6A240-50 |
Engine feature | - | 4 cycle, turbo charged, 6 cylinder in line, direct injection, water cooled |
Manual gearbox | - | FAST, 8 speed forward gear |
Emission compliance | - | National Exhaust Standard V |
Engine rated power | kW/(r/min) | 177/2300 |
Engine rated torque | N·M/(r/min) | 1000/1200-1800 |
Travel capability | ||
Max. travel speed | km/h | 90 |
Tyre | - | 11.00-20 18PR, 11.00R20 18PR |
Approach angle | ° | 24 |
Departure angle | ° | 12 |
Max. gradeability | % | 40 |
Lifting performance | ||
Max. rated lifting capacity | t | 25 |
Min. rated working radius | m | 3 |
Max. lifting torque (base boom) | kN·m | 961 |
Base boom length | m | 10.4-39.5 |
Lattice jib length | m | 8.3 |
Longitudinal outrigger span | m | 5.14 |
Transverse outrigger span | m | 6/4.34 |
Working speed | ||
Boom luffing time | s | 68 |
Boom full extension time | s | 150 |
Max. slewing speed | r/min | 2.5 |
Max. speed of main winch (single rope) (no load) | m/min | 125 |
Max. speed of aux. winch (single rope) (no load) | m/min | 125 |
Operator's cab
Driver's Cab
Chart of Loading capacity
For more information, please contact us.